Getting startedWorkspace orientation
Workspace

Find your way around Ultron

Start with the plant area and asset. In the Ultron demo, an engineer can open the burner area, select its primary-air fan and move from the current condition to the evidence and the maintenance request.

Customer guide · Updated 14 November 2026

#Workspaces and views

Workspace or viewHow to use it
Home and AssetsLocate the line, area and machine. Check that the selected asset and time window match the issue raised by the operator.
DiagnosisRead the suspected fault, component and likely cause. Identify the observation that triggered the finding and the local check that could confirm or challenge it.
PrognosisIdentify the event being forecast, the time range and the confidence. A projection to a vibration or pressure limit describes that threshold crossing. Equipment failure requires separate evidence.
AnalysisReview the underlying measurements, trends, units and alternatives. Compare a stated alarm limit with the actual reading and check the direction of the alarm.
MaintenanceUse the relevant preventive, predictive or proactive view. In the PM cell, find the inspection request, check its owner or status and record field observations as work progresses.
SimulationPractise a fault investigation with labelled simulated data. Replay a scenario and compare what Diagnosis, Prognosis and Analysis show.
Configure and AI AssistanceAdministrators can review asset mappings, users, rules and available integrations in Configure. Use AI Assistance, where enabled, to investigate a question and check the returned evidence.

#Projects and resources

Organise the commissioning materials for a plant and use case under a named owner. Keep the asset register, signal map, sampling assumptions, approved limits, test cases, inspection form and sign-off record together. Record revision dates and identify which configuration was active during a test.